Where to buy bona traffic hd?
One-year shelf life in unopened container. Nonflammable - Bona Traffic HD and Hardener should be stored in a climate controlled environment. KEEP FROM FREEZING.
One-year shelf life in unopened container. Nonflammable - Bona Traffic HD and Hardener should be stored in a climate controlled environment. KEEP FROM FREEZING.
How many coats of Bona Traffic HD should you use? Like Mega One, Bona always recommends a minimum of 2 coats of finish. Adding a third coat gives an added layer of protection that may be desired for some homeowners who are worried about scratches.
Coverage is approximately 350-400 square feet per gallon. Clear and colorless when dry, Bona Traffic HD highlights the true color of stained or natural wood floors. Available gloss/sheen levels: Gloss (65-70%), Semi-Gloss (40-45%), Satin (15-20%), Extra Matte (7-10%). No sealer needed over a stained floor.
Bona Traffic HD® is the most durable waterborne finish in the Bona System and is for homeowners that desire a clear and colorless finish that will highlight the true color of a stained or natural wood floor and won't yellow over time.
Bona Polish is NOT a hardwood floor cleaner. It is a cheap thin finish that you apply to your floors. Over time and repeated use the film gets thicker and it scuffs and scratches easily making the floors look unsightly. The only remedy to restore your floors is to strip the Bona Polish off.
Hardwood floor deep-cleaning – every 2-3 weeks
Fortunately, Bona comes to the rescue with the Bona PowerPlus Microfiber Deep Clean Pad and Bona PowerPlus Hardwood Floor Deep Cleaner. Our deep cleaner provides a powerful, oxygenated formula to penetrate tough, heavy buildup.
Absolutely! Bona Traffic does not become a urethane without the hardener. The finish will still dry but the film will be soft and will never reach its maximum durability.
Since it doesn't need to be rinsed, diluted, or wiped off, it does all of the hard work for you. You just spray it on the area of the floor that needs a bit of shine or a bit more in-depth cleaning, and then wipe it with a microfiber mop or cloth. That's it.
BE SURE YOU ARE USING THE RECOMMENDED COVERAGE OF 350-400 SQ. FT. PER GALLON. DO NOT SPREAD TOO THIN.
Does Bona floor cleaner leave a build up?
Bona products are specially designed to protect floors and the environment. Bona cleaners won't dull your floors or leave behind any residue.
What is the Best Finish for Hardwood Floors? Polyurethane is the most popular finish for floors. It's tough enough to handle constant traffic and is resistant to almost everything. There are two types of polyurethane finish: oil-based (solvent borne) and water-based (waterborne).
Moisture-Cure Urethane
It's basically one of the toughest, most durable types of finish out there, which means it's also quite tricky to apply and releases a high amount of VOCs that can linger for weeks.
The gloss of a satin finish disperses light and more easily conceals dirt, dust, and pet hair. Gleaming satin floors will also maintain their new appearance longer than other types of finishes. A matte finish, on the other hand, works well to hide imperfections such as scuffs, dents, or scratches.
Hard-wax oil finished floors are more water resistant than polyurethane-finished floors because they more readily allow for expansion and contraction. A polyurethane-finished floor essentially creates a plastic film over the wood, which can trap moisture and damage the floor.
Vinegar and Ammonia: Cleaning products that have a base of vinegar or ammonia eat away at the dirt on your floor - and also the floor's finish itself. Overtime, the acid will wear down your hardwood, leaving you with splotchy patches that are difficult to revive.
Bona Wood Floor Cleaner – Regular Cleaning.
Dry mop, sweep or vacuum (use a soft brush) to remove loose grit or dirt. Mist the product in small quantities on the surface and use the mop to spread it. Mop lengthwise of the wood. Leave the floor to try for around ten minutes after the application.
Do not wet mop wood flooring. Damp is good. Dripping wet is bad. If you can ring out the mop or pad, you're working with too much water.
Use a Bona microfiber damp mop with residue-free floor cleaner to polish your hardwood floors weekly. Damp mops work faster and capture residual dirt and grime your dust mop couldn't catch. Never use a traditional mop, as this could cause your wood to shrink and buckle.
How to clean wood floors. Remember: Water is wood's worst enemy (even on sealed floors!), so use a damp mop rather than a soaking wet one. "You don't want to let any water sit as you're cleaning your hardwood floors, so be sure to work in one small area at a time," Wise said.
Do you need 1 or 2 coats of Bona Sealer?
THE BONA NaturalSeal™ SYSTEM: Apply 1-2 coats of Bona NaturalSeal and 2 coats of a Bona waterborne finish. Bona NaturalSeal minimizes side bonding and grain raise, provides a build layer and prevents the finish from penetrating into the wood surface.
So, 24 hrs before walking on the floors (socks only – no shoes, no bare feet), 3 days before moving furniture back and 2 weeks for area rugs and dogs.
Just please don't use them to clean wood floors. Using vinegar and water as a homemade wood floor cleaning solution can have a negative effect on your wood floor. Since vinegar is an acid, it will break down the finish on the surface of your floor, and over time it will reduce the shine, and leave a dull appearance.
Yes, the Bona Wood Floor Cleaner is also safe for your laminate floor. Both the Bona Wood Floor Cleaner and the Bona Hard-Surface Floor leave no dulling or sticky residues behind.
The floor will take light foot traffic approximately 8 hours after the final application and may be put into full use after 24 hours. Allow the surface to dry for at least 3 days before using carpets or other floor coverings. Avoid installing heavy objects and do not damp mop the floor during this time.
The best way to clean hardwood floors and keep them in shape is to stick to a regular schedule of maintenance. Sweep, dust or dry mop daily. Vacuum weekly. Clean heavy-traffic areas with a damp mop twice a month.
Bona Hardwood Floor Polish offers a protective formula that renews floors by filling in micro-scratches and scuffs, shielding against future wear and traffic, and adding a durable high gloss shine.
The manufacturer recommends the following for floors finished with Bona Traffic HD: The curing process takes approximately 3 days (80% cured after 1 day, 100% after 3 days). The floor may be walked on after 24 hours, but remains susceptible to scuffing or marring until completely cured.
Bona Traffic HD has very low odor and is very low VOC. Volatile organic compounds (VOCs) are organic chemicals (chemicals that contain carbon) which evaporate at a high rate into the air in your home. Many VOCs are dangerous to human health or cause harm to the environment.
Bona Commercial System™ Hardwood Floor Cleaner Concentrate ratio is 1:32 (1-part concentrate to 32 parts water).
Why are my hardwood floors still dirty after mopping?
Your Cleaner/Water Ratio Is Off
Too much water means that the cleaner won't penetrate and cleanse the dirty floors like it's meant to. On the other hand, if you use too little water and a higher concentration of cleaner, the cleansing materials will stay on top of your wood floors after they've dried.
Since vinegar is an acid, it will actually break down the finish on the surface of your floor, and over time it will reduce the shine, and leave a dull appearance. Using vinegar and water to clean floors can also lead to an excessive amount of water on the floor, which can cause swelling and discoloration.
You can use a commercial wood-cleaning product, like Bona or Murphy Oil Soap. Be sure to follow the manufacturer's instructions. You can also make your own cleaner by mixing one part vinegar to 10 parts warm water. Add a few drops of liquid Castile soap.
With a higher shine than satin, the floor will reflect more light. The intricate grains and natural lines of the hardwood will show up much clearer, and the color of the wood appears deeper and richer. Semi-gloss is more durable than satin and can protect your floors from light damage.
Polyaspartic Floor Coatings
These floor coatings come with a lifetime warranty because that's how long they're expected to last you. Polyaspartic floor coatings are very damage resistant and strong. They won't chip, there won't be any hot-tire pick up, they're resistant to abrasion.
Tile made from ceramic or porcelain is the most scratch-resistant flooring. Ceramic tile is made of fired clay, and it's a hard and durable substance. Porcelain tile is a type of ceramic, but they make it from a more cultivated clay and bake it at higher temperatures.
Selecting a floor such as Hickory, Hard Maple or White Oak can protect your floor from damage, as these hardwoods are less susceptible to scratches than softer woods like Pine, Cherry or Black Walnut. Hardwoods with more dramatic grain patterns can help to hide scratches more easily.
Acid-Cured (Swedish) Finish
They're among the toughest of all hardwood flooring finishes, and the most expensive. They're sometimes called conversion varnish sealers. Acid-cured finishes have extremely high VOC content; you'll have to bunk elsewhere for a few days after finishing to give the odors a chance to clear.
Oil and wax-based matte finishes are best for households with dogs not only because they conceal dust, dirt and small scratches, but also because oil penetrates into the wood without forming a thick surface film.
Bona Traffic is a two-component finish available in two sheen levels: satin and matt.
How many coats of satin finish on hardwood floors?
Most flooring professionals will apply three coats of satin if they are doing a satin polyurethane. Flat sheens are obtained by adding flatteners such as crushed microcrystalline silica or microcrystalline aluminum oxide to the finish.
Bona Mega ONE® is an easy-to-use, fast-drying, crystal clear, water based floor finish that provides high build for superior protection.
We recommend at least 2 coats of oil based polyurethane + a lacquer sealer coat as a minimum for hardwood flooring. Extra coats = extra protection, but only one coat of oil based polyurethane may be applied per day, as it needs 24 hours to dry before applying another coat.
Cleaning and Maintenance
Maintenance of your polyurethane-coated hardwood flooring should include regular dust mopping & damp mopping only; do not wet mop. We suggest using only steam mops, or damp mopping using distilled white vinegar, or glass cleaners heavily diluted with water to clean your flooring.
Our cleaners do not have a particular expiration date; however they are biodegradable. Over time they will start to decompose. Typically, our cleaners will have a shelf life of 2-3 years.
How long should I wait between finish coats before applying another coat? Bona waterborne products dry in 2-3 hours under ideal conditions. If you are applying the same product then it will be okay to do so once dried.
Produced in Sweden, Traffic HD (Heavy Duty) has all the features and benefits of Bona Traffic, but is specially formulated for added durability and wear resistance.
Bona Traffic HD® is the world's leading water based floor finish. The best hardwood floor finish providing unsurpassed scuff, scratch and chemical resistance and is very low VOCs.
Since it doesn't need to be rinsed, diluted, or wiped off, it does all of the hard work for you. You just spray it on the area of the floor that needs a bit of shine or a bit more in-depth cleaning, and then wipe it with a microfiber mop or cloth. That's it.
Sticky floors happen when you have not passed the mop to remove too much cleaning solution or the wrong cleaning solution. It can also be due to dirty water used in rinsing your mop.
Do you have to dilute Bona?
Do i need to dilute Bona Cleaners with water? Unless the container states that it is a concentrate, Bona Cleaners are ready to use and should not be diluted.
It is a crystal-clear, two-component cross-linked finish that features aluminum oxide to resist the gradual but incessant friction of life on your floors. The Traffic HD Anti-Slip is the same product as regular Traffic HD, but it has been engineered to be more grippy.
Sheen Level
Bona Traffic Natural has a very low sheen of 6-8% whereas Bona Traffic HD Raw is even lower sheen of just 4%. This allows it to achieve an even more matt finish and gives more of an appearance of bare wood.
Add Bona Traffic HD Hardener (Part B) to finish (Part A). One 10.38 oz. bottle of hardener will activate one gallon of finish. To mix finish amounts of less than one gallon, use a 1:11.33 ratio.
What is the Best Finish for Hardwood Floors? Polyurethane is the most popular finish for floors. It's tough enough to handle constant traffic and is resistant to almost everything. There are two types of polyurethane finish: oil-based (solvent borne) and water-based (waterborne).
